by inproadmin | Jun 26, 2023
PROJECT REQUIREMENTS: The customer requested Fuel System for Back up generators and Fuel Monitoring and Leak Detection system for 3 Nos. of several paths sites: INPRO SOLUTION: The complete installation consists of different fuel supply systems for the gensets,...
by inproadmin | Feb 22, 2022
PROJECT REQUIREMENTS: The customer requested gas oil pumping to the daily service tanks of the normal operation power generator units. Solution adopted by INPRO The complete installation consists of two different fuel supply systems for the gensets, controlled by a...
by traspaso_proyectos_en | Nov 11, 2021
For a thermal treatment process of metals in the manufacture of helicopters, a specific methanol dosage is required at several points of use in the furnaces. The pressure and flow conditions must remain stable. This type of industrial systems using methanol to their...
by traspaso_proyectos_en | Nov 11, 2021
Ethylene glycol, along with other compounds diluted in water at high temperatures, are used for defrosting and frost protection of planes before starting the flight, when required due to weather and temperature. Tankers with hoisting platforms spray the entire...
by traspaso_proyectos_en | Nov 11, 2021
The next project required automated supply of JET-A1 aircraft fuel for testing engines in bench. In this process, the unloading process of the tanker to the main tank had to be monitored and managed, with the help of an unloading pump. But the main challenge of the...
