01. GP-30 IP-20

OIL TRANSFER PRESSURE UNITS- 30l/h

1 pump- 2 pumps

Inpro pressure units are equipment used to transfer liquid fuel such as diesel or HVO from a main tank to different consumption points through the pressurization of a line, for the supply of machinery that requires these fuels, such as generators (power generators) or burners for boilers in buildings.
.
There are several sizes and configurations of equipment, in which the flow rate that can control the equipment can vary (from 30l/h to 12,000 l/h), the maximum pressure at which they can work, with the possibility of redundancy in some components, and other parameters such as the type of power supply.
.
It can be Normal or Twin equipment that duplicates critical components to increase reliability.
.

 Application area example

Small units (from 30l/h to 1,500l/h) can be used for:
  • The supply of boilers in single-family houses.
  • Community of neighbors buildings
  • Small installations.
And large units (from 2,000l/h to 12,000l/h) can be applied in:
  • Large buildings requiring 24h/7 electricity
  • Data Centers
  • Hospitals
  • Airports
  • Malls...

Applications & Specific Features

  • Multiple burner, appliances or service tanks supplied with one GP pressure unit.
  • Appliances installed at different heights.
  • Modulating burners when using the Inpro Oil Burner Inlet Assembly (see Datasheet).
  • Oil Supply installation using ‘dead leg’ pipework. GP unit does not need external controls.
  • GP units operate on an internal pressure switch only pumping fuel when required.
  • Pressure regulators may be required at oil inlet to burners/appliances.
  • Limited suction lift may require GP unit to be sited near the oil tank.
 

Benefits and advantages of the GP-30 IP-20

  • Single-pipe installation with automatic pressure-controlled operation on demand: Lower installation costs, as no electrical connection to the point(s) of consumption is required.
  • Ideal for small installations: Its flow rate of 30 l/h is designed for low-consumption applications, such as homes, residential buildings and small installations.
  • Available with 1 or 2 pumps: Can be configured in Normal (N) or Twin (GE) versions, allowing redundancy with two pumps when required by the installation.
  • Compatible with diesel fuel and HVO: Designed to supply heating oil and HVO, expanding the installation's fuel options.
  • 230 V single-phase power supply: Operates at 230 V – 50 Hz, making it suitable for installations with a single-phase electrical supply.
  • Compact unit for low-demand applications: The single-pump version measures just 240 × 330 × 205 mm, providing a particularly compact solution for installations with low fuel consumption requirements.
 

Technical Features

MODEL GP-30 NW GP-30 GEW
FLOW l/h 30 30
CONNECTION TO THE HYDRAULIC CIRCUIT (Ø THREAD / Ø mm) SUCTION 10 10
DRIVE 3/8” F 3/8” F
POWER SUPPLY VOLTS 230 single-phase 230 single-phase
CONSUMPTION AMPS 1,38 1,38
MOTOR POWER C.V. 1/6 1/6
MAX. PRESSURE kg/cm2 3,5 3,5
SAFETY VALVE OPENS AT: kg/cm2 4 4
SOUND LEVEL dB (A) 58 58
MOTOR PROTECTION IP IP-20 IP-20
DIMENSIONS (mm) W x H x D 240 x 330 x 205 800 x 460 x 250
APPROX. WEIGHT Kg. 6,4 21

GP Videos:

 Pressure switch regulation  GP troubleshooting
GP30 GP 30