Solenoid valves with flow limiter

This is a control system that allows the passage of the liquid for filling from a main reservoir to a daily tank through an Oil Pressure Unit (system which lifts the oil) and a level switch (system which open/close the solenoid valve at low / high level). When liquid drops at the daily tank till the low level point, th level switch sends a signal to keep open the solenoid valve until the switch sends high-level close signal. In addition, the flow limiter, which is adjusted to allow passage of a constant flow, but keeping the pressure at the pipe generated by the Pressure Unit, avoiding the safety low pressure blockage. The filter is responsible for preventing dirtiness to be placed in the membrane of the solenoid and protecting the installation.

Benefits and advantages of the Solenoid Valve with Flow Regulator

  • Automatic filling control: Regulates the fuel supply to the day tank through a level switch that controls the opening and closing of the solenoid valve.
  • Constant and regulated flow rate: Incorporates a factory-calibrated flow limiter to maintain the fuel flow according to the installation's requirements.
  • Fuel transfer pump unit protection: The flow regulator maintains a minimum fuel circulation rate, preventing shutdowns due to low pressure.
  • Impurity filtration: Integrates a stainless steel mesh filter that helps prevent particles from entering the solenoid valve.
  • Adaptable to different installations: Available in various nominal diameters, from 3/8" to 3", to meet different flow rate requirements.
MODEL NOMINAL DIAMETER Kv Q max PRESSURE ALLOWED bar DIMENSIONS (mm)
mm m3/h m3/h min max A B C D
CC CA
3/8” 13 3,00 3,00 0,1 20 20 69 99,5 40 44
1/2” 13 3,00 3,00 0,1 20 20 72 101,5 40 44
3/4” 20 8,40 8,40 0,1 20 20 100 107 65 44
1” 25 9,60 9,60 0,1 20 20 104 112,5 65 44
1¼” 35 25,20 25,20 0,1 10 10 145 134 102 44
1½” 40 30,00 30,00 0,1 10 10 145 134 102 44
2” 50 37,20 37,20 0,1 10 10 145 148 118 44
3” 75 83,00 83,00 0,2 10 10 250 195 184 44